You are here: Home  :  Industrial Doors  :  Hormann Industrial Sectional Doors
(Can't see menu? Allow ActiveX controls!)

Hormann Industrial Sectional doors information 

Available models:

SPU40 - Steel doors, double-skinned, thermally insulated - 42mm
DPU     - Steel door with sections with thermal breaks - 80mm 
ASP40 - Steel/aluminium doors with narrow profiles
APU40 - Steel/aluminium doors (versions N and B)
TAP40 - Steel/aluminium doors with aluminium extrusion with thermal breaks - 42mm
ASR40 - Aluminium doors with narrow profiles
ALR40 - Aluminium doors (versions N and B) 
ALR Vitraplan - Exclusive aluminium door with flush-fitting glazing
ALS40 - Aluminium display window doors with real glass
TAR40 - Aluminium doors with thermal break profile - 42mm

SPU 40 Sturdy double-skinned steel door with good thermal insulation - 42mm For use in heated areas Industrial doors must not only be extremely sturdy, they also must exhibit good thermal insulation characteristics. Hörmann's SPU 40 door is a proven sectional door made of steel sections that optimally fulfils these requirements. Thanks to a combination of steel and PU rigid foam, the door leaf is both robust and insulating. The elegant Micrograin surface With its delicately lined profile, and a smooth surface with subtle ribbing at the section seams, this impressive new surface complements the elegance of modern architecture. Exquisite workmanship The hollow space in the double-skinned door leaf is uniformly foam-filled, which binds the 100% HCFC-free polyurethane rigid foam to the steel shell. This 42-mm-thick insulating core provides for the convincing robustness and thermal insulation. The surface of SPU 40 doors is Stucco-textured as standard, but the door is also optionally available in an elegant Micrograin version. Depending on the overall height of the door, sections are provided in the height combinations 625/750 mm and 375/500 mm. Optional Duratec coated glazing provides natural light inside. Secure and practical pedestrian passage is possible with an additional wicket door with trip-free threshold.

Back to top

DPU - Steel door double-skinned, thermally insulated with thermal breaks - 80mm 

Double insulated steel door for large temperature differences - the energy-saving door specifically for fresh logistics. Thermal protection lowers operating costs Fresh goods must be transported and stored in a closed cold chain from the manufacturer to the end customer. This requirement demands a high level of energy in every cooling process. The DPU door minimises temperature losses at door openings, making it ideal for use in cold store warehouses.  The hollow space in the double-skinned steel door is uniformly foam-filled with 100% HCFC-free polyurethane rigid foam, binding the material to the steel shell. The insulating core in DPU doors is 80 mm thick, providing it with excellent insulation values. Double seals at the lintel and floor increase door sealing and thus effectively reduce energy losses. The steel sections of the DPU door have thermal breaks on the interior and exterior. This ensures for a thermal insulation value of up to 0.7 W/m²K and reduces the accumulation of condensation on the interior of the door.

Back to top

ASP 40 An elegant Aluminium door with Micrograin bottom section

Slim profile architecture
The fully new frame construction for the ASP 40 door features a slim profile view and invisible section seams. This door can be optimally incorporated in modern industrial architecture with extensive glazing. In addition to an attractive appearance, the ASP 40 door has the sturdiness required for daily use.

Light and good thermal insulation
The aluminium profiles in ASP 40 doors are only 65 mm wide, allowing more light to enter the building. The vertical and horizontal door rails have an identical width, which results in a harmonious door appearance. The clear view is improved with the new 26-mm-thick DURATEC glazing that does not require a centre spacer. The double-skinned bottom section is foamfilled with PU rigid foam and is available in an elegant Micrograin surface. The interior is Stucco-textured. In addition to its high stability and transparency, the ASP 40 door also offers good thermal insulation.

Back to top

APU 40 Modern aluminium door with steel bottom section 

Universal application The combination of double-skinned steel bottom section and Aluminium glazing frame has more than proven itself in practice. The APU 40 door is very stable and lets a lot of light into the building. It is one of the most popular Hörmann sectional doors for factory buildings, thanks to its appealing features and numerous variants.  An attractive appearance  The glazed door sections above the bottom section are always evenly spaced. APU 40 doors always have a bottom section that is 500, 750, 1000 or 1500 mm high.  Individual versions  The high stability is mainly due to a 42-mm-thick insulating core made of 100% HCFC-free polyurethane rigid foam used to uniformly foam-fill the bottom section. The door is reliably protected against corrosion and environmental conditions through a high-quality primer-coating on galvanized material, and via Stucco texturing. The door is optionally available with a Micrograin surface on the exterior. On request, the door comes with a wicket door with trip-free threshold for use as a practical pedestrian passage.

Back to top

TAP40 - Steel/Aluminium doors with Aluminium extrusion with thermal breaks - 42mm

A door with three benefits The TAP 40 door unifies three advantages: good thermal insulation, sufficient natural light and high stability. This thermal door is used in buildings that require a comfortable inside temperature, as well as a sturdy door, such as in automotive workshops. Stability and thermal insulation Good thermal insulation is achieved in the TAP 40 door through aluminium tubular profiles with thermal breaks. They separate the outer and inner shell with glass-fibre reinforced polyamide spacers and also have a non-positive connection. In addition, 26-mm-thick DURATEC double glazing ensures excellent insulation and a clear view, as it does not need a centre spacer. In addition to being very sturdy, the double-skinned steel bottom section with a 100% HCFC-free PU rigid foam infill provides excellent insulation.  Thermal breaks in the frame profile via glass-fibre reinforced polyamide spacers (red) in conjunction with optional triple glazing. Maximum 7m x 7m door size.

Back to top

ASR40 - Aluminium doors with narrow profiles for facades with extensive glazing

A more beautiful appearance for architecture accentuated by glass
The new frame construction of the ASR 40 door perfectly suits modern glass facades and it is practically impossible to tell apart from the fixed elements of the facade. The profiles have a uniform vertical and horizontal width of 65 mm. The door appears elegant and harmonious thanks to the profile symmetry and invisible section seams.

More natural light and an improved view
The slim profile view in the new ASR 40 industrial sectional doors provides your customers and passers-by with an unimpeded view into your sales and exhibition areas and also helps you make use of daylight.

Transparency with optimum thermal insulation
The new 26-mm-thick DURATEC double glazing and intelligent profile geometry are responsible for the especially good thermal insulation in ASR 40 doors. As standard, the bottom section comes with a 26-mm-thick PU sandwich infill that is Stucco-textured on the exterior and interior. The fully glazed ASR 40 door is another, particularly attractive option.

Section seam with seal and finger trap protection The slim profile with invisible section seams Size range: Width up to 5000mm Height up to 7000mm

Back to top

ALR40 - Aluminium doors - Modern look underscores contemporary architecture

Prestigious door solution
With its extensive transparency, the ALR 40 door features a contemporary appearance. Extensive glazing down to the bottom section and a slim aluminium frame profile give this door its tasteful design. 

Door design with many variants
To ensure a clear and modern door appearance, Hörmann divides each door leaf uniformly from top to bottom. The door width is decisive for the profile variant: Either with a 52-mm profile width for door widths up to 5500mm or with a 91mm profile for door widths from 5510mm. Broader glazing is also available for the wide profiles. An optional wicket door with trip-free threshold is harmoniously integrated into the overall door.

Back to top

ALR Vitraplan - Exclusive aluminium door with flush-fitting glazing

For demanding building architecture The ALR Vitraplan door is an exclusive version of the ALR 40 door with wide glazing areas. The door is especially elegant thanks to offset, flush-fitting glazing. The frame profile is concealed, so nothing detracts from the clear overall appearance. Continuous glazing adds an eye-catching element to modern industrial structures and prestigious private buildings. The interior corresponds to the profile appearance of the ALR 40 B door. Hörmann's proven finger trap protection for industrial sectional doors is also included in ALR Vitraplan doors. Two colours to choose from The ASL Vitraplan can be optimally integrated in the facade with glazings in brown and grey, as well as a dark frame profile colour that harmonises with the glass. This exclusive door fascinates with a mix of mirroring and transparency. An eye-catcher for prestigious buildings and modern architecture!

Back to top

ALS40 - Aluminium display window doors with real glass

Large areas of glazing invite you to take a closer look
Seeing from the outside what’s on offer on the inside, coupled with the attraction of a light and airy showroom.
These are the benefits of the new Hörmann “display window” door with its slim-line aluminium profiles and the generously apportioned glazing. For example, for use in car showrooms, yacht and boatyards and at camper van and caravan dealers.

Equal-height infills in real safety glass
A good display window door should have the same effect as a showroom window. Hörmann achieves this impression by employing large areas of glazing with panes of exactly the same height. For this we use 6-mm laminated glass because a “showroom window” in an exposed location must be easy to clean and always look spick and span. On request, the door is available with double panes in 16-mm-thick “Sekurit” safety glass.

Size range: Width up to 5500mm, height up to 4000mm.

Back to top

TAR40 - Aluminium doors with thermal break profile - 42mm

Convincing arguments This door has a multitude of advantages: high transparency, exceptional stability and good thermal insulation. The modern design of the TAR 40 door can be integrated seamlessly into contemporary facades. Stable thermal breaks in the profile The exterior and interior shell of the profile are separated with glass-fibre reinforced polyamide spacers that have a non-positive connection. The best thermal insulation and comfort The high thermal insulation value is achieved through a combination of several door features: aluminium tubular profiles with thermal breaks, and cold-repelling double glazing. The exterior and interior shell of the profile are separated with glass-fibre reinforced polyamide spacers that also have a non-positive connection. DURATEC double glazing is 26-mm thick as standard, resulting in a high thermal insulation value. On request, the door is also available with DURATEC triple glazing for even better thermal insulation. As standard, the bottom section is infilled with 26-mm thick, 100% HCFC-free PU rigid foam. An optional wicket door with trip-free threshold provides a convenient passage for pedestrians without having to open the door all the way. This reduces heat losses and saves energy.

Back to top

Glazing: Windows are available as an option in steel double-skinned sections.  Glazing frames can be coloured to match the rest of the door.

Back to top

Colours:
Available in 14 standard colours on double skin steel sections.  Colours are increasingly being used to fly the company flag. In this regard, coloured industrial doors are an ideal vehicle. All industrial sectional doors from Hörmann are available in 14 preferred colours, as well as approximately 200 colours based on RAL (additional cost). 

The wet coating on the interior and exterior sides and coil coating procedure for double-skinned, 42-mm sections in preferred colours ensure high-quality, long-lasting colour. This maintains the attractive appearance of your door. 

Pearlescent, fluorescent and metallic colours are not available. Avoid dark colours if double-skinned steel doors and doors with thermal breaks are exposed to the sun. Section distortion (bow) can inhibit door function; this is the case with all sectional doors regardless of supplier. 

The galvanized sub-frame and fittings are not factory-coated. The frames for section windows and compound windows are black as standard. Door leaf reinforcements and end caps are Grey white (similar to RAL 9002) as standard.  Doors with double-skinned steel sections in any of the 14 preferred colours are Grey white (similar to RAL 9002) on the inside.

Back to top

High Security: Sectional doors with operators – Safety as standard thanks to a break-in resistant door security kit. Tightly locked and protected against forced opening. All Hörmann power-driven industrial sectional doors up to 5m high come with a break-in resistant door security kit as standard. This mechanical protection reliably prevents forced opening of the door, even in the case of a power failure.  Industrial sectional doors over 5m high are break-in resistant due to their heavy weight. Sectional doors with chain drive operators, self-locking gearboxes protect against forced opening. Increased security for night doors: In power-driven doors, an additional mechanical shootbolt can be installed. Because it is equipped with an electrical interlock, the operator cannot be started if the door is locked. Back to top

Manual Operation: As standard manual doors are supplied with a rope or pull rod to raise and lower the door. As an option on taller doors a link steel chain or chain hoist can be supplied.  A chain tensioner controls the chain and makes the opening a little easier. Shootbolt: Prepared for an on-site padlock for use as a secure night door. Floor locking: Extremely practical for frequently used doors. Convenient foot release. The automatic latch audibly engages when closed. Electric Automation: Hormann have a range of 3-phase and single phase motors with a variety of fitting applications to suit all projects where side room or headroom (or both) are limited.  High quality specification ensures smooth running and fast door travel with long lasting operation.

Rotary latch: An automatic latching disc securely latches the door.  Lock operation from outside: With the handle set, the door lock can be ergonomically operated from outside. From inside, the lock is operated via T-handle and locking pin.

Back to top

Door security kit: All Hörmann power-driven industrial sectional doors up to 5 m height are equipped with a break-in-resistant door security kit as standard.  This mechanical protection reliably prevents the door from being forcefully pushed open, even in case of a power failure.

Maintenance release: The electric operator need not be extensively dismantled from the door shaft for the statutory annual inspection work. This saves time and money. The maintenance release can be converted to a secured release at any time.

Emergency hand chain:  Through a combination of the standard emergency hand chain and the optional secured release, the door can be released or operated from the floor. 

Cable anti-slack device: This load-dependent interlock is integrated into the door system in case of a cable or spring breakage.  An additional safety feature for electric doors if door becomes obstructed and the safety edge not activated then the motor senses that a load bearing cable has gone slack and stops the door.  This reduces down-time because cables are less likely to jump off the drums.

Back to top

Control Boxes and Controllers    A wide variety of controllers are available to ensure that your doors can be used efficiently.  Others such as induction loops and radar are not shown.  Frequency and types of traffic together with surrounding environment will influence your choice.

Back to top

Safety:

As standard all electric doors have an optical safety edge system within the bottom rubber seal.  Power to the motor is stopped as soon as the rubber is depressed and the light beam broken. 

Leading photocell option (European patent) - more safety and higher speed)

Enhanced safety system is available thanks to the leading photocell VL 1, available an option.  Obstructions and
persons are are quickly detected and the door starts to reverse before contact is made. Thanks to this technology, Hörmann sectional doors can be operated at higher speeds without the permissible closing forces being exceeded.

The anti-crash protection at the sides prevents the swivel arms housing the photocells from being damaged when the door is closed.  The non-contact, automatic safety cut-out protects people and property.

Delivery: Delivery times are typically 6/8 weeks from final measure up to delivery to site.  All doors are supplied flat packed and are built up on site in 1 to 2 days depending on size and complexity. Download Brochure: Hormann's Industrial Sectional Door brochure is available for download and contains stacks of detail on these doors.     DOWNLOAD - 5MB - PDF file

Back to top

Sizes and clearance:
Hormann Industrial Sectional doors fit inside the building on the rear face of the brickwork/steel structure (reveals); they require clearance on either side and headroom clearance (the distance between the ordering height and any obstruction above (ceiling or lintel)) as detailed below:

All Hormann Industrial doors are specially built to order and therefore, within the maximums of each product,  made to measure sizes are the norm. 

1. Side clearance 
A 90mm wide frame securely supports the door panels on each side; additional clearance is also required on each side for the drums and motors.  This is fitted to the rear face of solid concrete blockwork (not Thermalites) or steel sections.  

a) Manual door - 165mm each side
b) Electric door - motor side 200-300mm dependant on door size
                     - non-motor side 125-150mm dependant on door size

2. Headroom clearance - varies with the size of the door and the running gear chosen.  Low headroom running gear requires a headroom from 200mm dependant on door height.  Standard headroom varies from 390m to 550mm again dependant on door height.

Warranty info:
Hormann offer a 1-year manufacturers warranty that covers both parts and surface finish.  Normal reasonable wear and tear, wilfil damage, etc, is excluded and products must be installed as per installation instructions.  Ongoing maintenance contracts are strongly recommended simply to 

Pricing:
The unique nature of each project means that understanding your requirements is key to specifying the correct product and getting it priced up.  Please call 01342 301811 to discuss your requirements, alternatively email drawings/specs through and we'll get cracking on it. 

Back to top

Sitemap